Configure Bet Buttons

1) Only red button colors are currently supported. The default button design must also be used.

2) You may use any table background and cards.

Note: For the most reliable hotkeys, the table should be in a slot built by IntuitiveTables. Hotkeys may not function properly in full screen mode or if you manually size the table.

Gameplay Settings

1) Auto-Switch between tables should be turned off. Let IntuitiveTables can control when tables pop up and activate by enabling stacking or Urgent Table Cycling.

2) Never show winning hands can help speed up play. Also, these buttons will be treated as urgent since they look the same as bet buttons.

Setup for Bet Slider hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-4 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) There is no Bet Slider Button 5 hotkey support for WPN inside IntuitiveTables. This is reserved for the All-In hotkey.

Note: WPN now supports these hotkeys inside their client and theirs may function more reliabily. However, IntuitiveTables may give more possible choices for hotkeys (namely 0-9).

Setup for All-In hotkey

1) Make sure button 5 is set to All-In for pre-flop and post-flop.

Note: When playing Omaha, the value "999999999999" will be sent to the bet box instead. It is not necessary to configure Bet Button 5 to All-In if you only play Omaha.

Setup for Preferred Seat

1) You must use the most center-middle preferred seat when playing in Stack and Tile mode.

2) This may also help speed up table switching in other setups like Multi-Stack or Urgent Table Cycling.

Avatar Configuration

1) Avatars with WHITE images around where the cards are dealt are not supported.

2) In Stack and Tile mode this may result in the table not going back to the stack properly.

3) To be safe, you may want to disable avatars completely by unchecking "Show Player Avatar"

Note: If you don't play with stacking or table urgency related features you can ignore this.

Setup for table placement

1) For optimal table placement, turn off the setting "Maintain Table Aspect Ratio". You may need to drag and drop the table back into its slot to update the size.

Choose Correct Client Skin

• For WSOP NJ/NV/DE and 888NJ choose WSOP for the skin.
• For 888.com choose 888 for the skin.
• For WSOP.PA or WSOP.MI choose WSOPPA for the skin.

Note: Auto-timebank does not apply to 888/WSOP.PA/MI (since it already has this built in)

Setup for Betting Hotkeys

1) Bet Button 4 must be set to Pot for Set Bet Size hotkeys to function properly.

2) Bet Button 5 must be set to Max for the All-In hotkey to work.

Setup for Set Bet Size Hotkeys

1) If you use Set Bet Size hotkeys for IntuitiveTables and you converted your chips to BB inside 888/WSOPPA, you must update this inside IntuitiveTables settings as well.

2) If you set a custom size to Increase/Decrease bet inside IntuitiveTables (such as .25 BB) this setting must match also.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-4 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "Pacific" in the Site list to the right in order for these hotkeys to work.

Note: Bet Button 5 must be set to "Max Bet" for these hotkeys to work.

Setup for Stacking and Table Urgency

1) On older versions (v2.0.3 and below) Disable shortcut keys (in blue) must be checked OFF. On 2.0.4 and higher this no longer is needed and can be checked on.

2) In order for focus to not be stolen away from other sites, pop up the game window must be disabled.

Setup for Preferred Seat

1) Preferred seat MUST be set to the most bottom-middle for all table counts.

2) For 6-max you may choose the slightly to the right bottom middle seat.

Check with Fold Hotkey (888/WSOPPA or MI only)

1) Use this option to have IntuitiveTables check with the fold hotkey when checking is possible. This will help to avoid the pop-up window that occurs when checking is possible.

Note: This option could cause IntuitiveTables to close unexpectedly. This happens quite rarely and so far the only reports of IntuitiveTables crashing with this feature were related to Chico poker.

Note: Due to the recent Ignition update, stacking tables on Ignition/Bodog/Bovada is not currently supported. If you rely on features such as table urgency or auto-timebank you must make sure the table is at least partially visible at all times.

Disable Fold and Show

1) Fold and Show MUST be disabled! Otherwise the Fold button will not be detected and IntuitiveTables may incorrectly hit the Call button with the Fold hotkey when Fold = Check when possible enabled.

* If you are on the newest version (IntuitiveTables v2.0.8 or higher) this no longer applies and Fold and Show is now supported

Note: For the most reliable hotkeys, the table should be in a slot built by IntuitiveTables. Hotkeys may not function properly in full screen mode or if you manually size the table.

Test the Check or Call Hotkey

1) Due to color fluctuations between different systems, the Call button detection may need to be adjusted.

2) Confirm your Check or Call hotkey is functioning by setting a hotkey to Check or Call and trying it out on an active table.

3) This is an important step otherwise features like Stacking, Stack and Tile, Auto-Timebank, and others may work as expected.

4) Once configured, you can remove the hotkey if you don't need it.

Note: If the hotkey is not working, proceed to "Fixing the Call Hotkey" below.

Fixing the Call Hotkey

1) Navigate to Site Setup -> Ignition Settings and try the different "Call button colors" until the hotkey begins to function.

Note: If you are still having problems after carefully testing all four color options please contact support with a screenshot of the table.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-3 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "Ignition" in the Site list to the right in order for these hotkeys to work.

Note: It is suggested to use Set Bet Size hotkeys on Ignition instead due to limited options for sizes in the Ignition client.

Setup for Stacking/Table Urgency

1) In order for focus to not be stolen away from other sites, Disable Pop to Front must be checked.

Setup for Preferred Seat

1) Preferred seat must be set to the most bottom-middle seat on all layouts.

2) This is imporant for hole card detection and other functions.

Video Settings

1) Chico now allows you choose DPI settings inside the client. Make sure Scale DPI is set to System or certain hotkeys will not function properly.

Table Settings

1) To avoid stealing focus from other sites, Activate Window on My Turn must be checked off.

2) Active Table Under Cursor can be handled inside IntuitiveTables Main Settings using "Activate table under mouse."

3) Highlight Active Table can be done inside IntuitiveTables Settings tab using "Activate Table Border" which is more customizable.

Setup for Hotkeys

1) Hotkeys must be enabled.

2) Make sure the betting hotkeys are set to the defaults as shown above.

Note: Do not set any hotkeys inside Chico to CapsLock. This may trigger when other hotkeys are being used on the table. However you can set a hotkey inside IntuitiveTables to CapsLock.

Mouse Wheel Setup

1) Hotkeys must be enabled.

2) Make sure the Slider hotkeys are set to the defaults as seen above.

Setup for Set Bet Size Hotkeys

1) If you use Set Bet Size hotkeys for IntuitiveTables and you converted your chips to BB inside your Chico skin, you must update this inside IntuitiveTables settings as well.

2) If you set a custom size to Increase/Decrease bet inside IntuitiveTables (such as .25 BB) this setting must match also.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-7 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "Chico" in the Site list to the right in order for these hotkeys to work.

Note: All 7 Bet Slider Button hotkeys are available for Chico. Bet Button 7 does not need to be configured to Max for this site.

Setup for Preferred Seat

1) For proper hole card detection the bottom middle seat must be used.

2) Chico has no built in preferred seating so this must be done manually. Make sure to email your Chico skin to request the preferred seating feature be added.

Note: Most of the time you will be seated in the center unless you manually joined a table.

Choose PartyPoker Client

1) Select "New" for PartyPoker Client if your client has updated to the new software (pictured on the right).

2) If you are still on the old software leave this as "Default" (pictured on the left). The default client still has the chat box in the bottom left.

Note: PartyPoker has made it much harder to detect the current blind level at the table on this new client. For now, in SNGs or MTTs table sorting "By Blinds" won't work at all and Set Bet Size hotkeys won't unless you have converted your chips -> BB inside the client.

Language and currency format

1) In order for all hotkeys to function properly, the PartyPoker client must be run in English. You may need to reinstall the client and choose "English".

2) Support for European currency format has been added. If your currency is displayed as "2,50 BB" instead of "2.50 BB" then you must enable "Use European currency format" in order for Set Bet Size hotkeys and custom mouse wheel sizes to work properly.

Setup for Betting Hotkeys

1) Button 4 should be set to "Pot" in order for Set Bet Size hotkeys to function properly.

2) Button 5 should be set to "Max Bet" to allow All-In and Bet Slider Button Hotkeys to function properly.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-4 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "Party" in the Site list to the right in order for these hotkeys to work.

Note: Bet Button 5 must be set to "Max Bet" for these hotkeys to work (check the previous step #3 above).

Disable Focus Stealing

1) If you want IntuitiveTables to cycle tables for you, disable pop to front and focus stealing here.

Dealer Chat (Default client only)

1) The chat must be visible and the Chat tab must be selected. Dealer chat must be set to "All Actions".

2) This is required to determine the correct big blind size since this is not visible on the title of the table.

3) This also helps determine the end of the hand for Stack & Tile mode.

Setup for Preferred seat (Default client only)

1) Set Preferred seat to bottom middle or slightly to the right.

2) Click through each number of tables and make sure this is set to match the photo above.

Note: For the most reliable hotkeys, the table should be in a slot built by IntuitiveTables. Hotkeys may not function properly in full screen mode or if you manually size the table.

Betting Hotkeys Setup (skins with 4 bet buttons)

1) Button 3 needs to be set to "Pot" Pre-Flop and 100% Pot Post-Flop

2) For the All-In hotkey to work properly, make sure bet button 4 is set to "Max" or "All-In"

Note: On these skins if the tables are too small it's possible Bet Button 2 will be clicked instead of "Pot". You may need to size up the tables in your grid or set Bet Button 2 also to "Pot".

Betting Hotkeys Setup (With 3 bet button skins)

1) Button 2 needs to be set to "Pot" Pre-Flop and 100% Pot Post-Flop

2) For the All-In hotkey to work properly, make sure bet button 3 is set to "Max" or "All-In"

Client Buttons Available Configuration

1) Make sure to select the amount of available (and not just visible) bet slider buttons in your client based on Step #1 or Step #2 above.

2) This will allow Bet Slider Button and Set Bet Size hotkeys to function properly.

Setup for Set Bet Size Hotkeys

1) If you use Set Bet Size hotkeys for IntuitiveTables and you converted your chips to BB inside your iPoker skin, you must update this inside IntuitiveTables settings as well.

Bet Slider Button Hotkeys Setup

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-3 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "iPoker" in the Site list to the right in order for these hotkeys to work.

Note: Make sure to choose the correct amount of Bet Slider Buttons available for your skin in Site Setup for iPoker (see Step 3 above).

Focus Stealing

1) If you play on multiple sites or with tables stacked it is suggested to disable focus stealing by matching the settings above.

Preferred Seat Setup

1) Make sure you are always centered by enabling "Auto centre my seat"

Currency Format

1) If your currency is displayed as "2,50 BB" instead of "2.50 BB" then you must enable "Use European currency format" in order for Set Bet Size hotkeys to work properly.

Check with Fold Hotkey

1) Use this option to have IntuitiveTables check with the fold hotkey when checking is possible. This will help to avoid the pop-up window that occurs when checking is possible.

Note: This option could cause IntuitiveTables to close unexpectedly. This happens quite rarely and so far the only reports of IntuitiveTables crashing with this feature were related to Chico poker.

Setup for Betting hotkeys

1) Depending on when you first started using IntuitiveTables, you may need to enable Revolution for all betting hotkeys you want to use.

2) You will need to repeat this for All-In,Increase/Decrease Bet, and Set Bet Size hotkeys.

Note: It is not suggested to enable Revolution for Increase/Decrease bet UNLESS you have Hotkey Target - "Active Table" set in hotkey settings.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "Revolution" in the Site list to the right in order for these hotkeys to work.

Note: It is suggested to use Set Bet Size hotkeys instead due to limited options for sizes in the client.

Setup for Stacking

1) To avoid focus stealing, disable auto-focus game windows.

Setup for Preferred Seat

1) For 6 and 8 max tables set the preferred seat as seen above (Seat 3 for 6-max and Seat 4 for 8-max).

Note: This is mostly for when using Stack & Tile for end of hand detection and faster table switching when clicking with the mouse.

General Setup

1) Enable Active Table popup should be disabled to avoid focus stealing.

2) Select table on mouse hover can be disabled as this is the same as Activate Table Under Mouse inside IntuitiveTables.

3) Table Borders can be handled inside the settings tab of IntuitiveTables Instead.

Note: For the most reliable hotkeys, the table should be in a slot built by IntuitiveTables. Hotkeys may not function properly in full screen mode or if you manually size the table.

Setup for Betting Hotkeys

1) Main betting Hotkeys must be enabled and set to their defaults.

2) For All In hotkey, Bet 5 should be set to Ctrl + F5.

Note: Do not set any hotkeys inside Winamax to CapsLock. This may trigger when other hotkeys are being used on the table. However you can set a hotkey inside IntuitiveTables to CapsLock.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-5 (pictured above).

2) If the table is too small these hotkeys may not work. Make sure the bet slider buttons are not being cut off from the table. You may need to increase the table size to these hotkeys to work properly.

3) Auto-Bet can be set to True to allow for immediate betting of these buttons.

Note: If you want the All-In hotkey to work, button 5 will have to remain set to All-In.

Table not displayed properly

1) If the border around your Winamax table is not being displayed properly follow the instructions below.

2) Right-Click your desktop icon for Winamax and select Properties -> Compatibility.

3) Set Compability Mode to Windows 7 and Run as Administrator. Make sure to restart the Winamax client.

Note: On IntuitiveTables v2.0.8 (or higher) the original issue was fixed and this step should be reversed by disabling "Run the program in compatibility mode" and restarting the Winamax client.

Expresso Issue and Stacking

1) The Expresso background will cause IntuitiveTables to always make the table urgent. Disable the Expresso background here.

Disable Smart Focus

1) Disable focus stealing by turning off Smart Focus here.

2) With this feature, the Multi-Stack and Urgent table cycling with IntuitiveTables is now fully supported.

Note: this is a new feature but it should allow IntuitiveTables to properly switch tables without GGPoker interfering.

Bet Slider Button Hotkeys Setup

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

Note: If you want the All-In hotkey to work, Bet Button 4 must be set to All-In (see below).

Setup for All-In Hotkey

1) Bet Button 4 must be configured to "Max" for preflop and postflop (pictured above).

Deck Selection

1) Make sure you are using a deck with white. The last deck in the list is not supported.

Check with Fold Hotkey

1) Use this option to have IntuitiveTables check with the fold hotkey when checking is possible. This will help to avoid the problem of "Fold to any bet" getting selected on GGPoker after the check occurs.

2) This feature will work as long as the text on the middle bet button is Check, Pasar, Passar, or Parole. If your language is not listed here contact support or change your language inside GGPoker to English.

3) This feature may not work if the table size is too small. If you are still having issues try increasing the table size a bit.

Note: This option could cause IntuitiveTables to close unexpectedly. This happens quite rarely and so far the only reports of IntuitiveTables crashing with this feature were related to Chico poker.

Hotkey Setup

Configure the built in PokerStars Hotkeys exactly as shown in the photo below (you may need to pause IntuitiveTables). Once these are set, you can choose any supported hotkey inside IntuitiveTables.

• Set Fold to Ctrl + F1
• Check/Call to Ctrl + F2
• Bet/Raise to Ctrl + F3
• Set Bet Amount to All-In Ctrl + F4
• Set Bet Amount to 100% pot to Ctrl + F5

1) (In Blue) You may choose either Table Under Mouse or Active Window for "Send Hotkeys To". This should match what you set inside IntuitiveTables Hotkeys Settings tab for Hotkey Target.

2) Make sure hotkeys are enabled click Apply Changes. Then click OK. Confirm the hotkeys are set by returning back to the hotkeys tab.

3) You may need to run PokerStars as Administrator if these hotkey still do not work.

Note: Do not set any hotkeys inside PokerStars to CapsLock. This may trigger when other hotkeys are being used on the table. However you can set a hotkey inside IntuitiveTables to CapsLock.

Theme Selection

1) Your selected theme must match inside PokerStars and IntuitiveTables. Be mindful if you are on Aurora Graphics or not (it is now the default).

2) Apply the theme to all tables, otherwise some tables may load in a different theme.

Note: Aurora Supported Themes are Mercury, Classic, Black, Carbon, and Carbon Lite.

Old Stars engine supported themes are Mercury, Nova, Classic, Black, and Hyper-Simple.

Disable Focus Stealing

1) (In red) Disable focus stealing here. Tables popping up can be handled by IntuitiveTables.

Note: (In blue) These are some suggested settings to help with Multi-Tabling.

Setup for Preferred Seat

1) Preferred seating must be enabled. You may have PokerStars auto-center you or choose manually the most bottom-middle seat at each layout.

Setup for Set Bet Size Hotkeys

1) IntuitiveTables cannot detect if you are converted to BB inside the PokerStars client. Use this option above if you have converted your chips to BB.

2) If you set a custom size to Increase/Decrease bet inside IntuitiveTables (such as .25 BB) this setting must match as well.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet slider buttons (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

Note: This feature is only supported with the Aurora engine. Bet Button 4 does not have to be configured to Max for this site therefore you can use all 4 bet buttons for custom sizes and All-In will not be affected.

Muck Winning Hands

1) If you leave the option to show hands, it may get grabbed as an urgent table and be moved or activated incorrectly. To fix this, follow these settings.

General Setup

1) IntuitiveTables can handle all the table placing. It's best to turn off the tiling tables settings.

2) Disable focus stealing by turning off Bring table to Top and Notify user when action is required.

Note: IntuitiveTable's "Set Bet Size" hotkeys may not work properly unless the client has been installed in English. If your region's language is not English, you may need to try re-installing CoinPoker in English.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "CoinPoker" in the Site list to the right in order for these hotkeys to work.

Note: It is suggested to use Set Bet Size hotkeys instead due to limited options for sizes in the client.

Setup for Set Bet Size Hotkeys

1) IntuitiveTables tries to auto-detect if chips are displayed in big blinds at the table. If the table data hasn't loaded properly IntuitiveTables will use the default setting chosen here.

2) If you display the "Show table data not loaded properly warning" you will be able to tell when this setting is being used at the table.

Setup for Preferred Seat

1) For proper hole card detection the bottom middle-right seat must be used.

2) CoinPoker has no built in preferred seating so this must be done manually when seated but the position should be remembered by CoinPoker over time.

Note: This is only really important for Stack and Tile mode.

Skin Selection

1) For any features requiring Flop/Turn/River detection such as Stack & Tile Mode, Set Bet Size hotkeys by Street, or the Flop Dealt sound, the skin selected must not have white in the middle of the table.

2) For this reason, the top middle and bottom middle skins are not supported.

Note: Due to a recent Firefox update, stacking tables on Global Poker is not supported. Browsers no longer update their graphics when the table is fully covered, which means stacking will not work properly. Tiling tables is still supported however, just make sure the table is at least partially visible at all times.

Setup for Table Placement

1) Make sure you are in Pro-Mode. This brings new tables out in separate windows.

2) Both Firefox and Chrome are supported.

3) Running Chrome using windows Run -> chrome.exe --app=https://globalpoker.com is also supported.

Note: Only table placing will be available for Global Poker. Please do not request hotkeys or any other functions. Global Poker is very strict with 3rd party tools so use at your own risk.

Setup for Lobby Hotkey

1) The Global Poker Lobby hotkey (configured in the Poker Site Tab) will function as long as the Global Poker Lobby is the selected tab on it's browser window.

General Setup

1) Disable focus stealing by turning off Pop up Table When it's My Turn.

2) Auto-Move cursor and Focus Table under Mouse could cause problems if Multi-Siting. It is suggested to turn these settings off.

Setup for Betting Hotkeys/All-In

1) Bet Button 4 must be set to Pot for Set Bet Size hotkeys to function properly.

2) Bet Button 5 must be set to Max for the All-In hotkey to work.

Setup for Set Bet Size Hotkeys

1) If you use Set Bet Size hotkeys for IntuitiveTables and you converted your chips to BB inside SwCPoker, you must update this inside IntuitiveTables settings as well.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-3 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "SwCPoker" in the Site list to the right in order for these hotkeys to work.

Note: Bet Button 4 must be configured to Max in order for the All-In hotkey to work.

Disable Hotkeys

1) When using IntuitiveTables hotkeys it's best to disable the built in SwCPoker hotkeys, otherwise they may conflict.

Setup for Preferred Seat

1) Right-click the bottom middle seat and select "Favorite Seat" to configure the preferred seat.

Note: Only table counts with the bottom middle seat possible will function perfectly with Stack and Tile. Otherwise the table may go back to the stack before you want it to.

Enable ClubGG

1) If you started using IntuitiveTables before ClubGG was supported, you will need to manually enable ClubGG in the Poker Sites tab.

2) You will also need to enable ClubGG for each desired action in the Betting Hotkeys "Configure Site" list. You must do this for each each action grouping by selecting that action (eg: Fold or All-In) and clicking enable for ClubGG (on the right).

Note: Support for ClubGG is currently in beta. Please update to IntuitiveTables v2.0.8.7 or higher by going to Update -> Version Manager inside IntuitiveTables or by downloading the newest beta manually here.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-4 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "ClubGG" in the Site list to the right for "Bet Slider Buttons" in order for these hotkeys to work.

Note: Bet Slider Button 4 will need to be configured to "Max" inside ClubGG for the All-In hotkey to work properly (see below).

Setup for All-In hotkey

1) Make sure button 4 is set to Max for pre-flop and post-flop.

2) Make sure "ClubGG" is enabled in the Configure Sites list for "All-In" in the Betting Hotkeys tab.

Setup for Increase/Decrease Bet

1) Increase/Decrease bet will only work when chips are converted to big blinds inside the ClubGG client.

2) Make sure "Chips are shown in BB inside the ClubGG Client" is enabled (it should be enabled by default).

3) As suggested in Step #1 make sure "ClubGG" is enabled in the Configure Sites list for "Inc/Decrease Bet" in the Betting Hotkeys tab.

Disable Focus Stealing

1) It is suggested to disable "Smart Focus" which could result in focus-stealing if playing on multiple sites.

Enable PPPoker

1) If you started using IntuitiveTables before PPPoker was supported, you will need to manually enable PPPoker in the Poker Sites tab.

2) You will also need to enable PPPoker for each desired action in the Betting Hotkeys "Configure Site" list. You must do this for each each action grouping by selecting that action (eg: Fold or All-In) and clicking enable for PPPoker (on the right).

Note: Support for PPPoker is currently in beta. Please update to IntuitiveTables v2.0.8.7 or higher by going to Update -> Version Manager inside IntuitiveTables or by downloading the newest beta manually here.

Configure Table Settings

1) Disable "Guess you next hand" to help IntuitiveTables properly detect when cards are folded.

2) Disable "Card Squeeze" otherwise IntuitiveTables won't be able to tell when it is your action.

3) It is suggested to keep "Exact Betting" enabled otherwise the Bet Slider Button hotkeys will automatically place the bet instead of just setting the bet size.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-3 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons (be aware of "Exact Betting" setting inside PPPoker in Step #2).

3) You may need to manually enable "PPPoker" in the Site list to the right for "Bet Slider Buttons" in order for these hotkeys to work.

Note: These hotkeys by default will initially click the "Raise" button on the table then trigger the Bet Slider hotkey. Be sure to NOT use these hotkeys when facing an all-in otherwise the all-in button may be clicked.

Setup for All-In hotkey

1) The All-In hotkey will work if the Call button is purple and says All-In

2) The All-In hotkey also works if facing an all-in and no raise button is found. This requires the setting "All in can Call or Raise all-in" inside IntuitiveTables Betting Hotkeys settings.

Note: There is currently no way to set the bet to all-in yet however this is planned for a future update.

Check with Fold Hotkey

1) Use this option to have IntuitiveTables check with the fold hotkey when checking is possible. This will help to avoid the pop-up window that occurs when checking is possible.

2) This feature will work as long as the text on the middle bet button is "Check". You may need change your language inside PPPoker to English or contact support to request your language be added to this feature.

3) This feature may not work if the table size is too small. If you are still having issues try increasing the table size a bit.

Note: This option could cause IntuitiveTables to close unexpectedly. This happens quite rarely and so far the only reports of IntuitiveTables crashing with this feature were related to Chico poker.

Enable uPoker

1) If you started using IntuitiveTables before uPoker was supported, you will need to manually enable uPoker in the Poker Sites tab.

2) You will also need to enable uPoker for each desired action in the Betting Hotkeys "Configure Site" list. You must do this for each each action grouping by selecting that action (eg: Fold or All-In) and clicking enable for uPoker (on the right).

Note: Support for uPoker is currently in beta. Please update to IntuitiveTables v2.0.8.7 or higher by going to Update -> Version Manager inside IntuitiveTables or by downloading the newest beta manually here.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-4 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons (be aware of "Exact Betting" setting inside uPoker in Step #2).

3) You may need to manually enable "uPoker" in the Site list to the right for "Bet Slider Buttons" in order for these hotkeys to work.

Note: These hotkeys by default will initially click the "Raise" button on the table then trigger the Bet Slider hotkey. Be sure to NOT use these hotkeys when facing an all-in otherwise the all-in button may be clicked.

Setup for All-In hotkey

1) Make sure the top bet button is set to All-In for pre-flop and post-flop.

Enable PokerBros

1) If you started using IntuitiveTables before PokerBros was supported, you will need to manually enable PokerBros in the Poker Sites tab.

2) You will also need to enable PokerBros for each desired action in the Betting Hotkeys "Configure Site" list. You must do this for each each action grouping by selecting that action (eg: Fold or All-In) and clicking enable for PokerBros (on the right).

Note: Support for PokerBros is currently in beta. Please update to IntuitiveTables v2.0.8.7 or higher by going to Update -> Version Manager inside IntuitiveTables or by downloading the newest beta manually here.

Emulator Setup

1) Currently only LDPlayer4 is supported. To request other emulators please contact support.

2) Make sure the side menu is closed on LDPlayer4 (click the double arrow seen in the photo above).

Configure Table Settings

1) Make sure Card Slide is disabled otherwise IntuitiveTables won't be able to detect when it's your action.

2) Make sure to not use the "Magnifying Glass" at the table. This can cause detection of elements to be incorrect.

Setup for Bet Slider Button Hotkeys

1) Bet Slider Button hotkeys can be configured to click the small bet size buttons 1-3 (pictured above).

2) Auto-Bet can be set to True to allow for immediate betting of these buttons.

3) You may need to manually enable "PokerBros" in the Site list to the right for "Bet Slider Buttons" in order for these hotkeys to work.

Note: These hotkeys by default will initially click the "Raise" button on the table then trigger the Bet Slider hotkey. Be sure to NOT use these hotkeys when facing an all-in otherwise the all-in button may be clicked.

Setup for All-In hotkey

1) The All-In hotkey will work if the Call button is purple and says All-In

2) The All-In hotkey will also work if the Raise button is purple.

3) The All-In hotkey also works if facing an all-in and no raise button is found. This requires the setting "All in can Call or Raise all-in" inside IntuitiveTables Betting Hotkeys settings.

Note: There is currently no way to set the bet to all-in yet however this is planned for a future update.